上一篇:新能源電動汽車充電樁沙塵試驗箱
下一篇:CS3200日本IWATSU CS-3300半導體特性曲綫圖示儀
產品名稱:充電樁溫濕度振動綜合試驗箱
產品型號:
更新時間:2025-06-08
產品簡介:
新能源電動汽車充電樁溫濕度振動綜合試驗箱符合滿足標準測試規範:MIL STD,GB,JIS,JEDEC,IEC等。GB/T2423.1-2008,GB/T2423.2-2008,GB/T2423.3-2006,GB/2423.10-99,JJG190-97
新能源電動汽車充電樁溫濕度振動綜合試驗箱TEMPERATURE/HUNMIDITY AND VIBRATION COMBINED CHAMBER
符合滿足標準測試規範:MIL STD,GB,JIS,JEDEC,IEC等。GB/T2423.1-2008,GB/T2423.2-2008,GB/T2423.3-2006,GB/2423.10-99,JJG190-97
新能源電動汽車充電樁溫濕度振動綜合試驗箱(Combined Temperature/Humidity/Vibration Test Chambers )產品優勢:
可與垂直振動台結合,也可與水平振動台結合。
特殊皮老虎設計,防水性能佳。
電動升降台設計,可延滑軌移動。
定值條件可設定時間: 0 ~9999小時59分鐘。
程式容量:可編輯120組程式×1500段,每段可設定時間0~99小時59分鐘,段數可任意分割,程式可自由相互聯結。
循環設定:可執行9999×999回次數循環,且可再切割出5組獨立之部份循環。
控製方式:*進斜率控製邏輯,采智能型PID+SSR/SCR正逆雙向同步輸出。
資料設定:觸控式對話框設定模式,操作簡易明確,內建目錄數據管理係統。
曲綫繪製:實際運轉溫濕度曲綫記錄,顯示;當程式設定的溫,濕度,時間資料完成,可立即轉成設定曲綫。
時間訊號:3組時式控製輸出接口,搭配10種之時間控製模式,方便執行外部驅動組件啟/停之時式規畫。
終了溫度:在完成測試時,可選擇執行返回常溫之狀態,以利測試物取出。
安全檢知:全功能之係統偵測,確保機台運轉安全.並可自動顯示故障項目。
外部保護:獨立式超溫保護裝置,可設定受測對象的溫度上限保護。
通信接口:附RS-232及RS-485之標準通信接口裝置。
新能源電動汽車主要用於航空,航天,船舶,兵器,電工,電子,汽車及汽車部品,摩托車,通訊,科研院所,計量等行業確定電工電子產品,儀器儀表或其他設備在運輸,存儲,使用過程中的可靠性試驗。主要由溫濕度試驗箱配合相應振動台而成,可獨立完成相應的溫度,濕度,振動試驗(垂直,水平方向)及三種因素的組合試驗。
Mainly used in aviation, vessel,armament,electronics, vehicles,parts and components of vehicle, motorcycle, communication, scientifi c research institutes,
measurement and other industries to mensurate the reliability of electric and electronic products, instruments and meters, or other equipment in the
transport, storage and using process. Mainly combined the temperature and humidity chamber with the corresponding vibration table. Could perform
the appropriate temperature, humidity, vibration test (vertical, horizontal) and a combination of three factors test.
根據試驗目的,設置場所,試樣固定方法,選擇使用合理的試驗箱與振動台的配合
方式。試驗箱與振動台既可以配合進行復合試驗,也可分開進行各自的試驗。
Select and use reasonable cooperating mode of the chamber and vibration table according to the purpose and site of test,and fi xing method of samples. The chamber and vibration table can cooperate for compositive test,and can conduct testing separay.
風冷係列電動振動係統 Electric vibration system of the wind-cooling series
水冷係列電動振動係統 Electric vibration system of the water-cooling series
數字式隨機振動控製儀 Digital random vibration control instrument
數字式正弦振動控製儀 Digital sine vibration control instrument
振動台相關資料 Relevant information on the vibration table
移動方式 Way of moving:
高低溫(濕熱)試驗箱導軌移動式
通過高低溫(濕熱)試驗箱在軌道上移動,與振動台進行配合。
Guide rail moving of high and low temperature(moist heat) chamberMove on the guide rail though high and low temperature(moist heat) chamber to cooperate with the vibration table.
振動台導軌移動式
通過振動台在軌道上移動,與高低溫(濕熱)試驗箱進行配合。
Guide rail moving of vibration table
Move on the guide rail though the vibration table to cooperate with the
high and low temperature(moist heat) chamber.
復合環境試驗高低溫(濕熱)試驗設備
Special high and low temperature(moist heat)testing equipment for compositive environment testing
標準配合的兩種機型介紹
底麵尺寸為600×800mm的042係列和1000×1000mm的102係列高低溫(濕熱)試驗箱作為標準配合係列。
Introduction to two types of machines in standard cooperation
High and low temperature(moist heat)chambers of 042 series with the underside dimension of 600×800mm and 102 series with the underside
dimension of 1000×1000mm as the standard cooperative series.
箱底麵活動底板的結構方式
試驗箱底麵采用活動底板的結構方式,以便於與振動台更好的配合。
Structure of the active motherboard of the underside of the chamber
The underside of the chamber takes the structure of active motherboard for better cooperation with the vibration table.
對話式輸入方式的程序計測裝置
運用6.5英寸TFT彩色液晶顯示屏,采用觸摸對話式輸入方式。具有20個用戶可編輯程序,並內藏10個標準試驗程序。
Program metering device of dialogue input mode
Utilize 6.5-inch color liquid crystal display screen and employ the input mode of touch dialogue.20 users can edit programs together with 10 standard
testing programs in it.
連接方式 Way of connection:
連接軸連接方式(垂直振動配合)振動台通過連接軸伸入箱體內,與試驗箱實現配合,達到復合試驗的效果。
Connecting through linking shaft(vertical vibration cooperation)
The vibration table enters the body of the chamber through the
linking shaft to cooperate with the chamber and achieve the
effect of compositive testing.
垂直,水平振動配合可非標對應
Cooperation of vertical and horizontal vibration can be in
non-standard correspondence.
真實的再現電子儀器儀表,汽車零部件,船舶,航空航天等行業產品的使用環境,實現溫度,濕度,振動綜合的復合試驗。
Truly recurrent the using environment of the electronic instruments
and meters, parts and components of auto, products of
the industry of aviation and spacefl ight, realization of compositive
testing of temperature, humidity and vibration.
產品應用 applications of the production
垂直方向配合,試驗箱(振動台)采用導軌移動
Vertical vibration coordination ,chamber (vibration table) moves on guide rail
垂直(水平)方向配合,試驗箱采用液壓升降台方式導軌移動
Vertical(horizontal) vibration coordination, chamber placed on the hydraulic lifting platform moves on guide rail
垂直(水平)方向配合,試驗箱采用龍門架方式導軌移動
Vertical (horizontal) vibration coordination, chamber hanged on the portal frame moves on guide rail
可選項目(option):
USB試驗資料讀取裝置
Labview 軟件接口
運轉時無法開門裝置
鋼化玻璃內門(附操作孔)
溫濕度自動記錄器
純水處理裝置
蜂巢式化學除濕係統
操作記錄軟件
LN2快速降溫係統
無限遠程遙控網絡係統
新能源電動汽車技術規格參數指標
Internal Dim. WíHíD(cm)
內部尺寸
60*85*80
100*100*80
100*100*100
External Dim. WíHíD(cm)
外部尺寸
122*120*190
162*144*202
162*144*220
Temp. Range
溫度範圍
高溫:L: 100℃, N:150℃
低溫:A:0℃, B:-20℃, C:-40℃, D:-70℃
Relative Humidity Range
濕度範圍20%~95% R.H.
溫度範圍
-70~+150℃
溫度波動度
±0.5℃
溫度均匀度
≤2℃
溫度偏差
±2℃
升降溫速率
可選速率範圍:3℃/min~15℃/min(-55~+80℃)
濕度範圍
20~98%RH(詳見溫濕度範圍圖)
溫度偏差
-3~+2%R.H.(75%R.H.以上),±5%(75%R.H.以下)
製冷方式
復疊式雙級壓縮機製冷方式
製冷機
進口壓縮機
觀察窗(mm)
400×500
測試孔(mm)
左右側各1個Φ100
控製器
進口7寸彩色液晶顯示觸摸屏
記錄裝置
微型打印機
電腦接口
RS485接口,RS232轉換綫,上位機操作軟件(選配)
內部尺寸(D*W*Hmm)
700*800*900
900*1150*1100
1250*1150*1100
配接振動台麵尺寸(mm)
水平台≤400×400
垂直台≤φ400
水平台≤600×600
垂直台≤φ600
單垂直台≤φ630mm
水平台≤900×900mm
垂直台≤φ900
注:尺寸或溫度可根據客戶要求定做,設備以實物為準。
上一篇:新能源電動汽車充電樁沙塵試驗箱
下一篇:CS3200日本IWATSU CS-3300半導體特性曲綫圖示儀